Ductless Mini Split Installation in Snoqualmie, Issaquah & the Eastside
Heating and cooling for the spaces ducts can't reach: additions, older homes, garages, ADUs, upstairs bedrooms, and the one room that's never right.
What a ductless mini split does
A mini split is a heat pump without ductwork. An outdoor unit connects through a small refrigerant line to one or more indoor heads mounted on a wall, ceiling, or floor, and each head heats and cools its own zone with its own control. Because there are no ducts, there's no duct loss, and installation means a three-inch hole and a day's work instead of opening walls and ceilings.
Around here they solve a specific list of problems: the 1970s split-level with electric baseboards and no air conditioning; the addition the furnace never quite reaches; the detached shop or ADU; the bonus room over the garage; the home with radiant or baseboard heat that wants cooling without adding ducts. Noble installs single-zone and multi-zone systems and services all major brands.
Ductless mini split services
Single-Zone Installation
One outdoor unit, one indoor head, one room solved. Garages, shops, home offices, primary bedrooms, sunrooms, and additions.
Multi-Zone Systems
One outdoor unit serving several indoor heads, each on its own control. The usual answer for a whole floor or a home with three or four problem rooms.
Whole-Home Ductless
Replace electric baseboards or wall heaters throughout the house with a ductless system, add cooling at the same time, and qualify for PSE's electric-to-heat-pump rebates.
Mini Split Repair & Maintenance
Coil and blower wheel cleaning, condensate problems, refrigerant leaks, error codes, failed boards and fan motors. All major brands.
Ductless or ducted?
Many homes end up with both: a ducted system for the main floors and a mini split for the room that was never comfortable.
A ducted heat pump is the better fit when
Good ductwork already exists
You want the whole house on one thermostat
You'd rather not see indoor heads on the walls
You're pairing with an existing furnace in a dual-fuel setup
A ductless mini split is the better fit when
There are no ducts, or the ducts are in bad shape
You're solving one room or a few, not the whole house It's an addition, ADU, shop, or garage
You want each room on its own control
The home has radiant or baseboard heat and needs cooling
FROM THE FIELD
Heating and cooling for a metal-sided shop on the Eastside
The Problem
A metal-sided shop building with no heating or cooling at all: unusable on the coldest mornings, an oven by mid-afternoon in summer, and no practical way to run ducts through an open steel structure. The owner had been getting by with a space heater and an open bay door.
What We Did
Installed a single-zone ductless system. The outdoor unit went on wall brackets, clear of the ground, snow, and debris; the refrigerant lines and condensate ran through the wall in line-hide so nothing was left exposed to the weather. The indoor head was placed for airflow across the work area rather than wherever was easiest to reach. A dedicated circuit and disconnect, then the lines pressuretested, evacuated, and the system commissioned and checked in both heating and cooling.
Heating and cooling in a building that had neither
Independent control for the space, on a schedule or a remote
No ductwork, no drywall, no change to the structure
Installed in a day
Refrigerant weighed in, airflow verified, temperature split checked, system run through its paces before we leave.
The Result
What a Noble mini split install includes
Heads placed for airflow, not just convenience
Where the head goes decides whether the room is comfortable or just has a unit on the wall. We place for throw, return, and condensate, and we show you the options first.
Clean lines and solid mounts
Line sets in line-hide, condensate drained properly, the outdoor unit on a pad or wall bracket clear of snow and splash, penetrations sealed. The install should look like it belongs on the house.
Evacuated, charged, and commissioned
A proper vacuum on the lines, charge verified, every head tested in heating and cooling. A rushed line set is the most common reason a mini split fails in year three.
Signs your mini split needs attention, and signs you need one
Call for a repair if you notice
Ice on the Unit
Outdoor coil or indoor head frosted over and not clearing.
Musty Smell on Startup
A dirty coil or blower wheel, and a cleaning that's overdue.
Water Dripping From a Head
A clogged condensate line or a failed pump.
Weak Airflow or No Response
A head that won't keep up, or won't answer the remote.
Blinking Error Lights
The system is reporting a fault; we can read it.
A mini split is the right fix when
One Room Runs Five Degrees Off
The thermostat says one thing; the bedroom says another.
Window Units Every Summer
New Addition, ADU, or Shop
Spaces the existing system was never designed to reach.
Baseboard Heat Only
Electric baseboards cost the most to run and offer no cooling.
Radiant Home, No Cooling
Keep the warm floors; add cooling without ducts.
Cooling you install and remove each year, and hear all night.
Mini split questions we hear most
Still have questions? Reach out anytime—our team is here to help with all your plumbing needs.
-
Yes. Cold-climate mini splits are rated to heat efficiently well below freezing, which covers valley winters. In the coldest snaps they keep running; they just work harder.
-
Most multi-zone outdoor units serve up to four or five indoor heads; larger systems go to eight. We size the outdoor unit to the total load, not just the number of heads.
-
High on a wall is most common, but ceiling cassettes and floor-mo
-
A single-zone system is the least expensive way to add heating and cooling to one space. Multi-zone and whole-home systems scale with the number of heads and the electrical work. We quote in writing after a site visit, with rebates applied.
-
Puget Sound Energy offers rebates on qualifying ductless heat pumps, with the largest incentives for homes converting from electric baseboard heat. We'll tell you what applies and handle the paperwork
-
Yes. Filters monthly, and a professional cleaning of the indoor coil and blower wheel once a year. Neglected heads lose capacity and start to smell.
-
Fifteen to twenty years with maintenance. We install and service all major brands; the right head for the room matters more than the name on it.
Why Choose Noble Plumbing, Heating & Cooling
Family-Owned with Transparent Pricing
Not a franchise—you work with the same local team from estimate to completion. Detailed written estimates before we start. No surprises or hidden fees.
Quality Materials & Workmanship Guarantee
We use industry-leading trenchless equipment and materials built to last 50+ years in Pacific Northwest conditions. Our installations are backed by our warranty.
Licensed & Experienced in East King County
LICENSED, BONDED, & INSURED. #NOBLEPL772BE
We understand local terrain, soil conditions, and permitting requirements for Issaquah, Snoqualmie, and King County properties.
Fix the room that's never comfortable
Tell us which space and what it's like now. We'll come measure and quote it in writing.